Connecting the Wi-Fi (Internet Gateway) Receiver
This is the unit that should be connected to your home broadband Internet router/box
It has a label on it: “internet GATEWAY RECEIVER”
It has two sockets:
- For a Cat 5 plug
- For a mobile phone type power supply
PLEASE DO NOT PRESS THE RESET BUTTON “R” AT ANY TIME
Firstly, check that the short Cat 5 cable supplied and originally fitted is connected to the back of your home broadband Internet router box (any socket except those marked with a red square) and the Internet Gateway Receiver.
Check at both ends that the plug is fitted properly: to remove press down on the plastic spring-latch – reinsert firmly until you hear a “click”.
Second, check the power supply to the Internet Gate Receiver is fitted properly:
- Fit if not in place
- If in place, please remove and refit
- Check the power supply is plugged in to the mains (and the socket is switched on) – if already in place please remove and refit
- In some cases, a USB power supply may have been fitted from your home broadband Internet router/box to provide this power supply – make sure this is plugged in at router-end and into the Internet Gateway Receiver (remove and refit if in place)
If you have done all this go to Checking Wi-Fi Bridge Connections
